Mineral filled polypropylene provides high mechanical stiffness, thermal stability, good low temperature properties and good dimensional stability over a wide temperature range. Available as a natural colored, colorable, UV stabilized compound.
|PROPERTY||TYPICAL VALUE||UNITS||ASTM METHOD|
|Melt Flow Rate (230°C, 2.16 kg)||0.97||g/10 min||D-1238 (procedure A)|
|Flexural Modulus||450,000||psi||D-790 (I.B., TAN, 0.5 in/min)|
|Tensile Strength @ Yield||4,000||psi||D-638 (IV, 2 in/min)|
|Elongation @ Break||223||%||D-638|
|Gardner Impact @ 23°C||280||in-lb||D-5420-96|
|Gardner Impact @ -30°C||>200||in-lb||D-5420-96|
|Notched Izod Impact @ 23°C||16.5||ft-lb/in||D-256|
|Notched Izod Impact @ -30°C||1.2||ft-lb/in||D-256|
|Heat Deflection Temp: 0.125 in @ 66 psi||237||°F||D-648|
|Heat Deflection Temp: 0.125 in @ 264 psi||149||°F||D-648|
|Coefficient of Linear Thermal Expansion||2.6 x 10^-5||in/in/°F||D-696 (-22°F to 176°F)|
|Coefficient of Linear Thermal Expansion||2.6 x 10^-5||in/in/°F||Intek method (-40F to 160F)|
|Dimensional Stability||Less than 0.3||%||D-1042 (180 F / 30 min)|
The information provided above is based on typical values, and is believed to be reliable. No warranty is given as to the suitability of the product for a particular application. Determination of the suitability of this product for any use is solely the responsibility of the user.